Sliding mode control design for oblique wing aircraft in wing skewing process

When the wing of Oblique Wing Aircraft (OWA) is skewed, the center of gravity, inertia and aerodynamic characteristics of the aircraft all significantly change, causing an undesirable flight dynamic response, affecting the flying qualities, and even endangering the flight safety. In this study, the dynamic response of an OWA in the wing skewing process is simulated, showing that the three-axis movements of the OWA are highly coupled and present nonlinear characteristics during the wing skewing. As the roll control efficiency of the aileron decreases due to the shortened control arm in an oblique configuration, the all-moving horizontal tail is used for additional roll and the control allocation is performed based on minimum control energy. Given the properties of pitch-roll-yaw coupling and control input and state coupling, and the difficulty of establishing an accurate aerodynamic model in the wing skewing process due to unsteady aerodynamic force, a multi-loop sliding mode controller is formulated by the time-scale separation method. The closed-loop simulation results show that the asymmetric aerodynamics can be balanced and that the velocity and altitude of the aircraft maintain stable, which means that a smooth transition is obtained during the OWA’s wing skewing.     

过虚拟交班点的能量最优制导律

针对固定目标的导弹过虚拟交班点制导问题，在希尔伯特空间下，基于最优化理论设计了有无终端落角约束两种情况下的全局能量最优制导律。通过对模型进行线性化，将提出的最优制导模型转化为线性二次型最优控制问题，在此基础上利用零控脱靶量（ZEM）概念对系统模型进行降阶，并推导出解析解。设计的制导律可以使导弹准确经过虚拟交班点，并实现期望终端落角。仿真结果表明，与经典制导律对比，该制导律可以显著减少全局控制能量消耗。     

考虑两种失效竞争的多状态冷贮备系统可靠性模型

针对装备系统中多状态工作部件存在退化失效与突发失效竞争的情况，以冷贮备系统为研究对象，假设系统内3个维修台可分别提供预防性维修与两种不同类型的修复性维修，采用随机检测策略，系统性能水平在一定范围内退化时进行预防性维修，部件完全退化失效时进行退化失效修复性维修，而突发失效时进行突发失效修复性维修；利用PH （Phase-type）分布描述模型中各类随机时间变量，外部冲击的到达则采用PH更新过程描述，建立了考虑退化失效与突发失效的多状态冷贮备系统可靠性模型。最后通过算例验证了模型的适用性，演示了预防性维修阈值以及三类维修速率对系统可靠性的影响。     

基于多并联支路的双余度永磁同步电机伺服系统分析

为了提高永磁同步电机(PMSM)伺服系统的可靠性,提出了一种基于多并联支路的双余度PMSM伺服系统。阐述了其基本的冗余设计原理和控制驱动原理。依据电机的具体结构和控制驱动方式,建立了基于多并联支路的双余度PMSM的数学模型及其控制系统模型,包括磁链平衡方程、电压平衡方程、转矩方程、机械运动方程和电流控制系统框图及其稳定性分析。并依据建立的模型,基于MATLAB/Simulink仿真其发生故障时的工作状态,得到整个伺服系统的响应数据,从理论上验证了该伺服系统的容错性能。     

边倒圆型气膜孔流动换热特性研究

为提高涡轮叶片气膜冷却效率,根据主流与射流间的相互作用关系,并以圆柱型气膜孔为基础,在气膜孔出口前缘位置进行边倒圆处理,同时对该新型的边倒圆型气膜孔结构进行了实验及数值计算研究。分析了边倒圆型气膜孔的流动换热机理,得到了新型气膜孔下游全表面气膜冷却特性分布及气膜孔的流量系数。结果表明:边倒圆型气膜孔内流动均匀,出口涡强度有所降低,进而能够减弱主流通道内的反转对涡强度;同时由于边倒圆孔的扩张作用使得射流法向动量降低、展向动量增强,从而提高气膜冷却效率。边倒圆型气膜孔的孔下游区域气膜贴壁性较好,气膜展向覆盖面积较大。相比于圆柱型气膜孔,边倒圆型气膜孔下游区域换热系数较高,远孔区域换热系数较小。新型气膜孔的流量系数比圆柱型气膜孔约大5%,孔内流动损失较小。整体上看,边倒圆型气膜孔具有较好的流动换热特性。     

考虑维修力量影响及载荷动态分配的k/n系统模糊可靠性分析

工程实际中,维修活动开展前往往存在一定时长的准备期,且由于环境时变性、系统长期运行后的劣化累积等因素导致部件状态性能水平存在不确定性,使得系统可靠性建模较为困难。对此,运用模糊数表征系统部件的失效转移率、修复转移率及修理工维修准备率的同时,以Power Law规则刻画部件间的故障相关关系,认为部件承担载荷超过某阈值时才会引发故障相关现象,并考虑了修理工数量与故障件数量之间关系对系统可靠性的影响,研究了载荷动态分配条件下带维修准备期的多修理工n中取k模糊多状态系统模型,建立了状态转移微分方程组,提出用逆向逐层分析的思路建立系统稳态概率系数的递推关系,应用α水平截集及Zadeh扩张原理确定了模糊状态概率的截集区间,得到了系统模糊稳态指标,最后通过算例给出了修理工数量及部件参数模糊程度对系统稳态指标的影响,验证了模型的适用性。     

直升机燃油系统增压转自吸供油动特性

通过某型燃油系统增压供油转自吸供油试验,研究了发动机入口处的流量历程。在试验研究和直升机燃油系统增压转自吸供油机理基础上,利用Flowmaster软件建立了某典型直升机燃油系统仿真模型,仿真结果与试验结果吻合较好,验证了模型的正确性。在此基础上,研究了直升机燃油系统增压转自吸供油动特性。结合仿真结果,分析了增压泵出口单向阀的弹簧预紧力、弹簧刚度对发动机入口燃油流量、压力的影响,为燃油系统零部件选型及参数确定提供参考。     

玉树地震前的电离层异常现象分析

分析了玉树地震前地基电离层探测临界频率、GPS TEC和卫星探测原位等离子体参量等多个参数的扰动变化信息, 研究了不同高度异常变化的时空关联性. 分析发现, 在地震前一天的4月13日, 多个电离层参量出现同步扰动异常, 电离层临界频率f₀F₂异常相对滑动中值增大40%, 异常空间上存在从震中东南向西南漂移的特性; GPS TEC异常增强15TECU (1TECU=1016m-2)左右, 分布于震中南部经度15°范围内, 且有明显的磁共轭效应; DEMETER观测的原位氧离子密度N_i(O+) 4月13日为1-4月中最强的一天, 异常分布偏向赤道区, 但仅局限在30°-50°左右的经度范围内. 综合三个参量的异常特征发现, 无论是空间的局地性还是时间上的密切关联均反映这次电离层扰动可能与玉树地震孕育有关. 结合其他观测信息, 进一步探讨了这次地震孕育过程的地震电离层耦合机理.      

An innovative navigation scheme of powered descent phase for Mars pinpoint landing

Pinpoint landing (within 100 m from the target) is essential for future Mars exploration missions. This paper deals with one aspect of the pinpoint landing architecture—the navigation performance improvement during the powered descent phase, and proposes an innovative navigation scheme to obtain the vehicle complete and accurate states. On the basis of dead reckoning relying on the Inertial Measurement Unit, measurements of the Integrated Doppler Radar are adopted to correct the vehicle velocity and altitude. Distance between the vehicle and one Mars Orbiter as well as their line-of-sight relative velocity is measured by a radio sensor, and integrated in the filter to correct the vehicle horizontal position. The innovative navigation system is based on an Extend Kalman Filter. Two observation schemes are developed. One considers measurements of the Integrated Doppler Radar and radio range measurement. Another further considers radio velocity measurement. The performance of the innovative navigation scheme is greatly influenced by the position of the Mars Orbiter with respect to the target. Stochastic analyses are performed to obtain optimal locations of Mars Orbiter. Finally, the innovative navigation scheme performances are assessed through stochastic simulations. Its performance improvements are demonstrated by comparison with the Integrated Doppler Radar only navigation scheme.     

基于虚拟仪器的真空计电参数检定系统

介绍了真空计电参数检定装置及检定方法,并基于美国NI公司的Labview软件开发平台和真空计电参数检定规程,结合日常型号服务的真空计电参数计量需求,开发了真空计电参数检定程序。程序以模块化思想为基础,可进行不同厂家各类真空计的的检定,实现数据自动处理,报告自动生成。